Updated daily

Standards & certifications

ISO 22716 and GMP for Cosmetics: Same Thing or Two Standards?

Buyers comparing Thai factories often ask what is the difference between ISO 22716 and GMP for cosmetics, because one quote says GMP certified and the next says ISO 22716. The shor

TEditorial: Thai Cosmetic Factory· 9 min read
ISO 22716 and GMP for Cosmetics: Same Thing or Two Standards?

Buyers comparing Thai factories often ask what is the difference between ISO 22716 and GMP for cosmetics, because one quote says GMP certified and the next says ISO 22716. The short answer: GMP is the general practice of controlled, documented manufacturing, and ISO 22716 is one specific international guideline that describes it for cosmetics. They overlap heavily, but the certificates behind them are not interchangeable.

The difference between ISO 22716 and GMP for cosmetics, in plain terms

Good Manufacturing Practice is a concept, not a single document. It means a factory makes products in a controlled, repeatable and traceable way: trained people, clean and suitable premises, checked raw materials, written procedures, records for every batch, and a system for handling things that go wrong.

Different bodies have written that concept down for cosmetics in different documents. The most widely recognised are:

  • **ISO 22716,** the international guideline on cosmetic GMP published by the International Organization for Standardization. It is voluntary in itself, and factories are audited against it by private certification bodies.
  • **ASEAN Cosmetic GMP,** the guideline used under the ASEAN Cosmetic Directive, which is the framework Thailand and its neighbours follow. In Thailand it is tied to the national regulator, the Thai FDA.
  • **Other national or regional versions,** which follow the same principles with local details.

So when a factory says GMP certified, the accurate follow-up is: GMP according to which guideline, issued by whom? A factory that says ISO 22716 has answered the first half of that question already.

In practice the requirements are close. A plant run properly under one will usually be near to meeting the other. The gap that matters to a buyer is not the content of the standards but who checked the factory, what exactly they checked, and whether your destination market recognises that evidence.

What ISO 22716 actually covers

ISO 22716 is organised around the flow of a product through a factory, which makes it a useful reading list for buyers even if they never see the standard itself. Its main areas include:

  • **Personnel:** organisation, responsibilities, training, hygiene and health.
  • **Premises:** layout, separation of areas, cleaning, pest control, ventilation and lighting.
  • **Equipment:** design, installation, calibration, cleaning and maintenance.
  • **Raw materials and packaging materials:** purchasing, receipt, identification, release and storage, including water quality.
  • **Production:** manufacturing and packaging operations, batch numbering, in-process controls.
  • **Finished products:** release, storage, shipment and returns.
  • **Quality control laboratory:** test methods, acceptance criteria, sampling and retained samples.
  • **Out-of-specification results, deviations and waste.**
  • **Subcontracting:** how outsourced activities are controlled.
  • **Complaints and recalls.**
  • **Change control, internal audit and documentation.**

Two things are worth noticing. First, the guideline focuses on product quality. It does not, by itself, cover worker safety, environmental performance or the safety assessment of your formula, which are handled by other rules and standards. Second, it describes what should be controlled rather than prescribing exactly how, so two certified factories can still differ a great deal in discipline and capability.

For **product development** work this matters: GMP governs how a formula is manufactured consistently, not whether the formula is good.

What ISO 22716 actually covers — what is the difference between ISO 22716 and GMP for cosmetics

What a GMP claim from a Thai factory may refer to

The letters GMP appear on many Thai factory profiles, and they do not always point to the same thing. When you review **Thai OEM/ODM factories**, sort the claim into one of these groups.

  • **ASEAN Cosmetic GMP recognised through the Thai FDA.** This relates directly to cosmetic production under the regional framework.
  • **ISO 22716 certification** from an independent certification body. Common among factories that export to Europe or supply international brands.
  • **GMP for another product category.** Food, dietary supplement and pharmaceutical GMP are separate systems with their own rules. A factory with strong supplement GMP is not automatically certified for cosmetics, and the reverse is also true.
  • **Other management standards** such as ISO 9001, which covers quality management in general and is sometimes mentioned alongside GMP. It is useful, but it is not a cosmetic GMP standard.
  • **A statement of practice without a certificate,** for example GMP standard facility or built to GMP. This may be honest, but it is a description rather than third-party evidence.

None of these is a reason to reject a factory. Each simply tells you something different. Ask the factory to state the exact standard, the issuing body, the scope of products covered, the site address and the validity dates, and to send the certificate itself. Rules and recognition schemes change, so check current requirements with the Thai FDA or a regulatory adviser rather than relying on a sales brochure.

Which one your destination market expects

The right certificate depends on where the product will be sold and who you will sell it to.

  • **European Union and United Kingdom.** Cosmetic regulations there require products to be manufactured under GMP, and ISO 22716 is the reference standard generally used to demonstrate it. Your responsible person will normally ask for evidence in that form.
  • **ASEAN markets.** The ASEAN Cosmetic Directive expects manufacture in line with ASEAN Cosmetic GMP or an equivalent. Each country applies this through its own authority and notification process.
  • **United States.** Requirements for cosmetic manufacturing practice have been developing under newer legislation. Check the current position with the FDA or a US regulatory specialist before assuming any certificate is sufficient.
  • **Gulf states and other regions.** Many accept or request ISO 22716 or a GMP certificate from the national authority as part of product registration. Details vary by country.
  • **Retailers and marketplaces.** Large retailers often set their own requirements on top of the law, which may include a specific certificate or their own audit.

A practical approach is to list your launch markets and channels, then ask your importer, distributor or responsible person in each one exactly which document they need. Send that list to shortlisted factories before you compare prices. A lower quote from a factory whose certificate is not accepted in your market is not a saving.

Treat all of this as general orientation and confirm with the authority or customs broker in the destination country.

Which one your destination market expects — what is the difference between ISO 22716 and GMP for cosmetics

How to verify a certificate before relying on it

A certificate is a claim that can be checked, and the check takes minutes. Build it into your **supplier verification** routine.

  • **Legal name and address.** The certificate should name the same company and the same site that will make your product. Groups with several plants are not certified as a whole unless each site is listed.
  • **Scope.** Read the scope statement. It may cover only certain product forms, such as liquids and creams, and exclude others like aerosols, powders or hot-pour products.
  • **Standard and version.** Confirm it says what the sales team said.
  • **Issuing body.** Note who issued it. For ISO 22716, check whether the certification body is itself accredited and by which accreditation body.
  • **Dates.** Look at issue and expiry dates and ask when the last surveillance audit took place.
  • **Authenticity.** Many certification bodies offer an online register or will confirm a certificate number by email. Use it.
  • **Recent audit findings.** Ask for a summary of the last audit, including any non-conformities and how they were closed. A confident factory will discuss this.

Directories and sourcing platforms can speed up the first screen. THAIMOST, for example, lists Thai suppliers with verification badges, and industry associations and trade fairs are other starting points. Verification reduces risk but is not a guarantee, so do your own check of the documents whichever route you use.

A certificate is not the audit: what still needs your own eyes

Certification shows that an auditor found the system acceptable on the days of the audit. It does not show how the factory will treat your product. Use the certificate to shortlist, then look for evidence of everyday discipline.

Things to ask for or observe, in person or by video:

  • **A sample batch record** with sensitive details masked, to see whether weighing, mixing steps, checks and sign-offs are recorded as they happen.
  • **Raw material control:** quarantine and release labels, storage conditions and how materials are traced to a batch.
  • **Water system** monitoring, since water is the largest ingredient in many cosmetics.
  • **Cleaning and line clearance** between products, especially where allergens, colours or fragrances change.
  • **Retained samples and stability data** for products similar to yours.
  • **How deviations and complaints are handled,** with a real example.
  • **Subcontracted steps,** such as filling or printing done elsewhere, and how they are controlled.

Signs that call for more questions: a certificate for a different address, a scope that does not include your product type, reluctance to share any audit information, records that look filled in all at once, or answers that change between the sales contact and the quality team.

Finally, put the standard into the manufacturing agreement: the certification the factory will maintain, your right to audit, and notice if the certificate lapses or the site changes.

Need expert support?

Leave your details and our team will get back to you.

FAQ

Frequently asked questions

Is ISO 22716 the same as GMP?

ISO 22716 is one written guideline for cosmetic GMP, so a factory certified to it is following a recognised form of GMP. But GMP is a broader term, and a GMP certificate may refer to a different guideline, such as ASEAN Cosmetic GMP, or even to a different product category. Always ask which standard and who issued it.

Do I need a factory with ISO 22716 to sell in Europe?

European cosmetic rules require manufacture under GMP, and ISO 22716 is the standard normally used to show this, so most responsible persons will ask for it or for equivalent evidence. Confirm the exact requirement with your responsible person or regulatory adviser before selecting a factory, as they carry responsibility for the product file.

Can a factory with supplement or food GMP make my cosmetics?

Only if it also holds appropriate approval and certification for cosmetic production. Food, supplement and cosmetic GMP are separate systems with different scopes. Some sites hold several, each covering particular production areas. Check that the certificate you receive names cosmetics, the correct site and the product form you plan to make.

Does a GMP certificate mean my product will be good quality?

Not on its own. GMP shows the factory has a system to make products consistently and traceably. Product quality also depends on the formula, the specifications you agree, the raw materials, testing and how well the brief was written. Use certification as a minimum requirement, then define and check quality for your specific product.

Prepared by the Thai Cosmetic Factory team for informational purposes. Some links may lead to referred partners.

Articles

Related articles

Guide

Finding a Halal Cosmetic Factory in Thailand

Thailand has become a serious sourcing destination for halal-certified cosmetics, thanks to a dense manufacturing base, competitive formulation capability, and growing demand from

Read more
Guide

Cruelty Free Cosmetic Factory Thailand: A Buyer's Vetting Guide

Finding a cruelty free cosmetic factory in Thailand is less about spotting a logo on a website and more about verifying a chain of decisions: how ingr

Read more
Guide

How to Assess Environmental Compliance at a Cosmetic Factory

Environmental compliance rarely shows up on a first factory tour slide deck, yet it often says more about how a manufacturer is actually run than its finished-product samples do. A

Read more
Guide

What Is the Difference Between ISO 9001 and GMP Certification?

Buyers often ask what is the difference between ISO 9001 and GMP certification because both logos appear on factory brochures as if they meant the same thing. They do not. ISO 9001

Read more
Guide

What GMP Means When Choosing a Cosmetic Factory in Thailand

If you are evaluating a GMP cosmetic factory in Thailand, the certificate itself is only the starting point. GMP (Good Manufacturing Practice) tells you a facility has documented p

Read more
Buying guide

Organic Certified Cosmetic Manufacturer Thailand: A Buyer's Vetting Guide

Searching for an organic certified cosmetic manufacturer Thailand can offer is not as simple as filtering a directory by a checkbox labeled "organic." Certification schemes differ,

Read more
Get the factory checklist