Updated daily

Standards & certifications

What to Ask a Cosmetic Factory About Allergen Control on Shared Lines

Knowing what to ask a cosmetic factory about allergen control protects your brand from two problems: mislabelled fragrance allergens and cross-contact from products sharing the sam

TEditorial: Thai Cosmetic Factory· 8 min read
What to Ask a Cosmetic Factory About Allergen Control on Shared Lines

Knowing what to ask a cosmetic factory about allergen control protects your brand from two separate problems: fragrance allergens that are missing from your label, and cross-contact from other products made on the same equipment. Most contract manufacturers run many brands through shared tanks and filling lines, so the question is not whether lines are shared but how well the risk is managed. This article gives you the questions, what good answers sound like, and the red flags to note.

Two kinds of allergen risk, and why buyers often check only one

When brand owners talk about allergens, they usually mean the fragrance allergens that must be declared on the ingredient list in many markets. That is important, but it is only half of the picture in a shared manufacturing environment.

**Formula allergens** are substances that are intentionally in your product, often as components of a fragrance or essential oil, such as linalool, limonene or citral. Your label must reflect them correctly according to the rules of each market where you sell.

**Cross-contact allergens** are substances that are not in your formula but could end up in your product because the same mixing vessel, pipework or filling nozzle was used for another product. Common examples in cosmetic plants include nut-derived oils, wheat or oat proteins, certain colourants, and preservatives with known sensitisation profiles. For a brand that markets fragrance-free or sensitive-skin products, a trace of another client's fragrance can undermine the whole positioning.

A good factory treats both as part of its quality system under GMP principles, not as an afterthought. When you start the conversation, ask the factory to explain how it manages each type separately. If the answer only covers labelling and not cleaning, or the reverse, you have found the first gap to explore.

Questions about raw materials and supplier documents

Allergen control starts before anything enters the mixing tank. The factory needs reliable information from its raw material and fragrance suppliers, and it needs a process to keep that information current.

Ask these questions:

  • **Do you hold an allergen declaration for every fragrance and essential oil you use in my product?** The declaration should list the regulated allergens and their concentration in the fragrance, so the factory can calculate levels in the finished product.
  • **Do you receive an IFRA conformity certificate for each fragrance?** This shows the fragrance is used within the industry's standards for the product category.
  • **How do you handle supplier changes?** If a fragrance house reformulates or the factory switches to an alternative supplier, how are you notified and how is your label checked again?
  • **Do you keep specifications and certificates of analysis for botanical extracts and oils** that may carry allergenic proteins, such as nut or cereal derivatives?

What good looks like: the factory can show a raw material file for a sample ingredient within minutes, with documents dated and linked to a supplier approval record.

A red flag is a factory that says the fragrance house handles all of that, with no internal review. The factory, not the fragrance supplier, is responsible for what goes into your batch, and your brand carries the consequences if something is missed.

Questions about raw materials and supplier documents — what to ask a cosmetic factory about allergen control

Questions about shared equipment, cleaning and scheduling

This is where cross-contact is prevented or allowed. In a shared facility, the key controls are cleaning procedures, verification that cleaning works, and smart production scheduling.

Questions to ask:

  • **Which equipment will my product share with other products?** Mixing tanks, transfer hoses, filling heads, utensils.
  • **What is the written cleaning procedure between products?** Ask to see the actual document, including detergents, temperatures, rinse steps and who signs off.
  • **How do you verify that cleaning worked?** Visual inspection alone is weak for allergens and fragrance residues. Stronger systems use validated cleaning methods, swab tests or rinse-water checks at defined intervals.
  • **How do you schedule production?** Many factories run fragrance-free or sensitive products first after a full clean, and heavily fragranced products later.
  • **Are any parts dedicated?** Gaskets and hoses can absorb fragrance; some factories dedicate them to specific product families.

What good looks like: a clear changeover checklist, cleaning records you can trace to a batch number, and a sensible explanation of how high-risk materials are sequenced.

Red flags include cleaning procedures that are verbal only, no records linking cleaning to batches, or a factory that cannot say which other products run on the same line. If your positioning is sensitive skin, you may want written confirmation of how your product is scheduled.

Labelling fragrance allergens for the markets you sell in

Even a perfectly clean production line will not save you if the label is wrong. Fragrance allergen labelling rules differ by market and have been changing, so the factory should be able to support you with accurate calculations.

In the European Union, regulated fragrance allergens must be named on the ingredient list when they exceed set thresholds, commonly 0.001 percent in leave-on products and 0.01 percent in rinse-off products. The EU expanded its list of labelable fragrance allergens in 2023, with transition periods for existing products. Several other markets follow or reference similar approaches, while others have their own lists. Treat this as background and confirm current requirements with your regulator or a regulatory consultant in each target market.

Questions for the factory:

  • Can you calculate the concentration of each declarable allergen in my finished product, based on the fragrance supplier's data?
  • Which market's rules are you applying, and do you track updates?
  • Will you provide a written allergen statement for my product dossier?

What good looks like: a calculation sheet that shows the fragrance level in the formula, each allergen's concentration in the fragrance, and the resulting level in the product. That sheet should be updated whenever the fragrance or its dosage changes. If the factory cannot produce it, budget for a regulatory consultant to do the work.

Labelling fragrance allergens for the markets you sell in — what to ask a cosmetic factory about allergen control

Documents to request and how to judge them

Questions are useful, but documents are proof. Before you sign, ask for a short document pack covering allergen control. A capable factory will not hesitate to share redacted examples.

A practical pack might include:

  • **Allergen or cross-contact policy**, explaining how the factory classifies and manages high-risk materials.
  • **Cleaning procedure and changeover checklist** for the line your product will use.
  • **Cleaning verification records**, with client names removed, showing results and sign-offs.
  • **Raw material approval procedure**, including how fragrance and botanical suppliers are assessed.
  • **Allergen calculation template** for finished products.
  • **Complaint and adverse reaction procedure**, describing how consumer reactions are recorded and investigated.

When you review them, look for consistency. Do dates and signatures appear where the procedure says they should? Do records refer to real batch numbers? Is there evidence of corrective action when something went wrong? A system with occasional documented deviations and fixes is often more trustworthy than one with suspiciously perfect records.

Keep copies of what you receive and note the version numbers. If a problem appears later, you will want to know which procedures were in place when your product was made, and the factory will respect a client who keeps organised records.

Verifying on site and building it into the contract

Paperwork can be polished for buyers. A visit or a third-party audit lets you see whether practice matches procedure. When you walk the floor, watch a changeover if possible, look at how hoses and gaskets are stored, check that cleaned equipment is labelled with its status, and ask a line operator to explain the cleaning steps in their own words.

Then translate what you learned into the agreement. Useful clauses include:

  • The factory must notify you before changing any fragrance, supplier or dosage that could affect allergen labelling.
  • Your product's scheduling requirements, if you need it run after a full clean or away from certain materials.
  • Access to cleaning and batch records on request.
  • Responsibilities and steps if a consumer reports a reaction.

If you are still building a shortlist, directories of Thai OEM/ODM factories and B2B platforms such as THAIMOST let you request quotes from Thai factories and compare how each one responds to these questions. The quality of answers often separates experienced beauty and cosmetics manufacturing partners from those who mainly sell on price.

Allergen control will rarely be the headline of a sales presentation. That is exactly why asking about it early tells you so much about how a factory thinks about quality in general.

Need expert support?

Leave your details and our team will get back to you.

FAQ

Frequently asked questions

Is it normal for a cosmetic factory to share lines between brands?

Yes. Most contract manufacturers produce for many clients on shared equipment. What matters is the quality of cleaning, verification and scheduling controls. Dedicated lines exist but usually make sense only for very specific products or large, long-running volumes.

Can a factory guarantee my product is free from all allergens?

A responsible factory will not promise absolute absence. It can describe its controls, show evidence that cleaning works and explain residual risks. Be cautious with any absolute claim, and align your own marketing wording with what the factory can document.

Who is responsible for fragrance allergen labelling, the brand or the factory?

Legal responsibility depends on your market and who is named as the responsible person on the product. In practice, the brand needs accurate data from the factory and fragrance supplier, so define who calculates and checks the allergen statement in your contract.

How often should allergen calculations be updated?

Whenever the fragrance, its supplier or its dosage changes, and whenever the regulations in your markets are updated. Ask the factory to include allergen review in its change-control process so updates are triggered automatically rather than remembered by chance.

Prepared by the Thai Cosmetic Factory team for informational purposes. Some links may lead to referred partners.

Articles

Related articles

Guide

Thai FDA GMP vs ISO 22716: What Buyers Need to Verify

Thai FDA GMP vs ISO 22716 is a question of who issues the document and who enforces it — and neither certificate answers the question buyers actually care about.

Read more
Guide

Verifying ISO Certification at a Cosmetic Factory Before You Sign

A certificate on the wall or a PDF in an email thread is not proof of anything. ISO certifications are issued by accredited bodies, carry registration numbers, and expire — which m

Read more
Guide

How to Assess Environmental Compliance at a Cosmetic Factory

Environmental compliance rarely shows up on a first factory tour slide deck, yet it often says more about how a manufacturer is actually run than its finished-product samples do. A

Read more
Guide

What Is the Difference Between ISO 9001 and GMP Certification?

Buyers often ask what is the difference between ISO 9001 and GMP certification because both logos appear on factory brochures as if they meant the same thing. They do not. ISO 9001

Read more
Guide

ISO 22716 and GMP for Cosmetics: Same Thing or Two Standards?

Buyers comparing Thai factories often ask what is the difference between ISO 22716 and GMP for cosmetics, because one quote says GMP certified and the next says ISO 22716. The shor

Read more
Guide

How to Verify a Cosmetic Manufacturing License in Thailand

How to verify cosmetic manufacturing license in Thailand is a harder question than it first appears, because no single certificate proves everything. A credible factory should be a

Read more
Get the factory checklist